Gaggenau RX496, Installation Instructions Manual

Page: 22 / 26

22
9. Insta lli ng a f r eestand i ng app li ance
The use of a wall fixing is mandatory for freestanding
appliances.
!
Wa r n i ng!
Freestanding appliances will tip over if they are not
secured to the wall.
The necessary angle brackets are supplied with all
freestanding appliances.
1. Position the angle brackets over the existing tapped
holes on top of the appliance at the back.
2. Mark drilling points on the wall.
The wall fixing must be able to withstand a pulling force
of 500N.
3. Drill the holes. Check for the presence of cabling
inside the wall before you drill.
4. Secure the angle brackets to the wall and the top of
the appliance.
To adjust the s i dewa ll extens i on fo r f r eestand i ng
app li ances:
1. Unscrew the screws on the angle brackets.
2. Hold the sidewall extension and remove the
adhesive tape.
3. Pull the sidewall extension down to the floor.
4. Secure the sidewall extension to the angle
brackets.
5. Peel the protective film off the cover.
6. Affix the cover to the side wall above the hinge.