37
6.1 General
6.2 Replacing the lamp
The appliance must always be disconnected
from the power main when being repaired.
If the appliance does not function correctly, check
the fuses first.
If the power supply is functioning correctly, but your
appliance still does not work, notify your Gaggenau
dealer, who will provide you with the address and
telephone number of your nearest factory
authorized service agent or contact Gaggenau USA,
tel. (800) 828-9165.
Repairs may only be carried out by authorized
electricians, in order to guarantee the safety of the
appliance.
Unauthorised tampering with the appliance will
invalidate any warranty claims.
You can obtain spare lamps from Gaggenau
Customer Service or a dealer. We recommend that
you use these lamps only. (Order number 157312)
Proceed as follows:
– Disconnect fuses.
– Remove one of the lamp cover screws.
– Swivel the cover to the side.
Caution:
The lamp cover may still be hot.
– Push the lamp to the side by about 3/16”.
The lamp can now be titled down and removed.
– Insert the lamp in the reverse order. Swivel the
cover back to its original position and screw it
on. (Caution: Secure the seal properly!)
6. Maintenance
Note:
Do not touch the halogen lamp with your hands.
Use a cloth and only touch the edges of the lamp.
Fig. 48
Fig. 49
