Before you start pyrolytic self-cleaning
–
Remove extreme soiling from the oven.
– Manually clean the door seals, the inside of the
door and the glass panel because the pyrolytic
cleaning process does not clean these parts.
–
Important!
Check that the oven door is firmly closed on the
oven.
Proceed as follows:
Switching On
–
Remove all loose interior parts (e.g. wire rack or
meat probe) from the oven com-partment.
There
must be no objects left in the oven
compartment!
– Close the oven door.
– Turn the “Temperature” and “Modes” knobs of
the oven to be cleaned to the left to the
(Pyrolysis) symbol. The recommended time
03:00 and the symbols
(Door Lock),
(Duration) and
(Pyrolysis) flash in the display.
– You can change the recommended time by
pressing the
–
or
+
key. You can choose between
02:00, 02:30 and 3:00.
– Press the
(Confirm) key. An audible signal is
sounded.
– For your safety, the oven door is locked. This
process takes 30 seconds. The
(Door Lock)
symbol flashes and the oven lighting goes off.
– The
(Door Lock),
(Duration) and
(Pyrolysis) symbols light up in the display during
pyrolysis.
Do not try to open the oven door during the
self cleaning process.
Note:
During the pyrolysis process, it is not
possible to query the temperature value.
Tip:
Wait until the appliance indicates that the
pyrolysis process has ended. This ensures that you
will achieve an optimum cleaning result.
35
50
50
Fig. 45
Fig. 46
Fig. 47
If you press the
(Timer) key once (upper oven)
or three times (lower oven), the remaining
pyrolysis duration is shown on the display.
If you press the
(Timer) key twice (upper oven)
or four times (lower oven), the end time of the
pyrolysis is shown on the display.
O
350
400
450
550
500
300
250
200
150
