9
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
To avoid electrical shock hazard, before
servicing the appliance, switch power off
at the service panel and lock the panel to
prevent the power from being switched
on accidentally.
Electromagnetic interference
WARNING
This induction cooktop generates
and uses ISM frequency energy that
heats cookware by using an
electromagnetic field. It has been
tested and complies with Part 18 of
the FCC Rules for ISM equipment.
This induction cooktop meets the
FCC requirements to minimize
interference with other devices in
residential installation. Induction
cooktops may cause interference
with television or radio reception. If
interference occurs, the user should
try to correct the interference by:
ʑ
Relocating the receiving antenna
of the radio or television.
ʑ
Increasing the distance between
the cooktop and the receiver.
ʑ
Connecting the receiver into an
outlet different than the cooktop.
It is the user’s responsibility to correct
any interference.
CAUTION
Persons with a pacemaker or similar
medical device should exercise
caution when standing near an
induction cooktop while it is in use.
Consult your doctor or the
manufacturer of the pacemaker or
similar medical device for additional
information about its effects with
electromagnetic fields from an
induction cooktop.
WARNING
Hazard due to magnetism!
The wireless temperature sensor is
magnetic. The magnetic elements
can damage electronic implants
such as pacemakers or insulin
pumps. People with electronic
implants should therefore not put the
temperature sensor in the pockets of
their clothes and should maintain a
minimum distance of 4" (10 cm) with
respect to their pacemaker or similar
medical device.
Cooling fan
The cooktop is equipped with a cooling
fan on its underside. Should the cooktop
lie above a drawer, there must be no
objects or paper in it. They may be
sucked in and compromise the cooling of
the appliance or damage the fan.
There must be a minimum distance of ¾"
(20mm) between the content of the
drawer and the fan input.