en
Automatic switch-off
20
14 Automatic switch-off
If you operate a cooking zone for an extended period
and do not change any settings, the automatic safety
shut-off is activated. Depending on which performance
level has been selected, the cooking zone switches off
automatically after 1 to 10 hours.
An audible signal sounds when this time has elapsed.
The illuminated ring on the activated control knob
flashes.
lights up. The cooking zone stops heating.
14.1 Switching on the appliance again after
the automatic safety switch-off
1.
Turn the control knob to .
2.
Turn the control knob for the required cooking zone
to the power level.
14.2 Switch-on time depending on the
power levels
The following overview displays the number of hours
after which the hob is switched off, depending on the
selected power level.
Power level
Number of hours
10
to
5
to
4
3
to
2
to
1
If you activate the frying sensor, the hob switches off at
power levels to after three hours.
15 Locking the control panel for cleaning
You can use this function to lock the control panel for
cleaning for a short time. You can remove liquids that
have boiled over without changing the settings you
have selected on the activated hob.
The function has no effect on the control knob. You
can switch off the appliance at any time. The power
supply to the appliance is interrupted while the lock is
on. The cooking zones may still be hot. The ventilation
continues.
15.1 Activating the lock on the control panel
for cleaning purposes
▶
Press .
a
An audible signal sounds.
a
The display for the previously activated functions
flashes.
a
The control panel is locked for 10 minutes.
a
The appliance stops heating.
a
The ventilation system continues to run.
a
The timer is paused.
a
The appliance switches off if you do not deactivate
the function within the next 10 minutes.
15.2 Deactivating the lock on the control
panel for cleaning purposes
▶
Press .
a
The function has now been deactivated.
16 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
16.1 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and the factory preset values.
Display
Selection
Audible signals
All signal tones are switched on.
1
Only the fault signal is switched on.
1
Factory setting
Display
Selection
Power management function. Limit the
total power of the hob. The available set-
tings depend on the maximum power of
the hob.
Deactivated.
1
Lowest level.
...
Highest level for the hob.
Check cookware; cooking results
→
Not suitable.
Not optimal.
Suitable.
1
Factory setting
