Gaggenau CI 292 600, Use And Care Manual

Page: 46 / 96

46
Suitability test of cookware
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the element being used.
1 With the cookware still cold, fill it with approx.
200 ml of water and place it on the center of the
element with the diameter that most closely
matches that of the base of the cookware.
2 Go to the basic settings and select the
™ˆ
setting.
3 Touch the settings range.
A
will flash on the
element display.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear on the element display.
Check the result using the table below:
To reactivate this function, touch the settings range.
Notes
‒ If the diameter of the element used is much smaller
than the diameter of the cookware, only the middle
of the cookware can be expected to heat up. This
may result in the cooking results not being as good
as expected or being less than satisfactory.
‒ You can find information about this function in
section
~
"Basic settings"
‒ You can find information about the type, size and
positioning of the cookware in the section on
~
"Cooking with Induction"
Customer service
If your appliance needs repairs, our customer service is
there for you. We work hard to help solve problems
quickly and without unnecessary service calls, getting
your appliance back up and running correctly in the
least amount of time possible.
When you call, please indicate the product number
(E-Nr.) and serial number (FD-Nr.) so that we can
support you in a qualified manner. You will find the type
plate with these numbers on the bottom of the
appliance. To avoid having to search for a long time
when you need it, you can enter your appliance data and
the customer support telephone number here.
Please read the use and care instructions provided with
your appliance. Failure to do so may result in an error in
using the appliance. This could result in a service call
that instead of fixing a mechanical issue is only needed
for customer education. Such calls are not covered by
the appliance warranty.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
You can rely on the manufacturer’s expertise. Rest
assured that the repair will be handled by trained
service technicians who have the original replacement
parts for your appliance.
Result
‹
The cookware is not suitable for the element and will
therefore not heat up.*
‚
The cookware is taking longer to heat up than expected
and the cooking process is not going as well as it ought
to.*
ƒ
The cookware is heating up correctly and cooking is pro-
gressing well.
* If there is a smaller element available, try the cookware again
on the smaller element.
X|
É
Y| [|
\|
Z|
E-Nr. FD-Nr.
Customer Service
O
USA
877 442 4436
toll-free
CANADA
877 442 4436
toll-free