Operation
en-us
21
Cooking function
Temperature range
°F (°C)
Suitable for, e.g.
Tips
Frying with a large
amount of oil in a pot
340 - 355
(170 - 180)
doughnuts, dumplings
¡
Heat the oil with the lid on.
¡
Remove the lid after the audible signal and
add the food, unless there are different in-
structions in the cooking charts.
¡
Set the temperature to 340°F (170°C).
Setting the boiling point
The point at which water starts to boil depends on the
height of your home above sea level. If the water is boiling
too vigorously or not vigorously enough, you can set the
boiling point.
1.
Select the basic setting .
2.
The boiling point is set to setting 3 by default. If your
home is at an elevation between 650 and 1300 ft. (200 -
400 m) above sea level, there is no need to change the
boiling point. If not, choose the correct setting from the
following table according to your altitude.
Altitude ft. (m)
Basic setting
0 - 330 (0 - 100)
330 - 650 (100 - 200)
650 - 1300 (200 - 400)
1
1300 - 2000 (400 - 600)
2000 - 2600 (600 - 800)
2600 - 3300 (800 - 1000)
3300 - 4000 (1000 - 1200)
4000 - 4600 (1200 - 1400)
Above 4600 (1400)
1
Factory setting (may vary according to model)
Note: The temperature level 212°F (100°C) is sufficient
for efficient boiling, even if the water does not boil very
quickly. However, you can change the boiling point. For
example, if you want it to boil more quickly, you can select
a lower altitude.
Setting the cooking sensor function
Requirement: The cooktop is turned on.
1.
Attach the wireless cooking sensor to the cookware.
"Wireless cooking sensor", Page 28
2.
Place a pot filled with sufficient liquid on the cooking
zone and cover it with a lid.
3.
Select the cooking zone with the twist knob.
a
. lights up in the cooking zone display.
4.
Press .
a
A signal sounds.
a
lights up in the cooking zone display.
5.
Press the symbol on the wireless cooking sensor.
a
Once the cooking sensor has been detected, the default
temperature of 200°F (95°C) lights up in the cooking
zone display.
6.
Set the desired temperature with the twist knob. The
temperature can be changed in increments of 5 or 10°F
(approx. 5°C).
7.
The cooking zone starts to heat up. The cooking zone
display shows the heating progress from to and
flashes alternately with the set cooking temperature.
a
Once the set cooking temperature is reached, a signal
sounds and the heat-up indicator goes out. The cooking
temperature is displayed.
8.
Remove the lid after the signal tone and add the food.
Keep the lid closed during the cooking process.
9.
You can also call up the cooking sensor functions via
the wireless cooking sensor:
‒
Place the cookware and press the symbol on the
wireless cooking sensor.
‒
Select the cooking zone with the twist knob. When
the cooking sensor function is ready, . lights up in
the cooking zone display.
‒
Set the desired temperature with the twist knob.
Summary of Contents for CI 282 602
Page 1: ...en us User manual CI 282 602 Cooktop Gaggenau...
Page 3: ...3 15 5 Warranty exclusions 44 15 6 Obtaining warranty service 45...
Page 46: ......
Page 47: ......
