5
Getting to know your appliance
The instruction manual is the same for various different
hobs. An overview of the models with their dimensions
is given on
page 2
.
The control panel
Notes
‒
When you touch a symbol, the respective function
is activated.
‒
Always keep the controls dry. Moisture reduces
their effectiveness.
‒
Do not pull pans close to the displays and sensors.
The electronics could overheat.
The hotplates
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be
used, for example, to keep a small meal warm or to melt
cooking chocolate. As the hotplate cools down further,
the display changes to
œ
. The display remains lit until
the hotplate has cooled sufficiently.
!
Î
Ü
Displays
‚
-
Š
Heat settings
•
/
œ
Residual heat
›
PowerBoost function
‰‰
Timer
Controls
#
Primary switch
−
Control panel pause / Childproof lock
@
Automatic zone control
Ž
PowerBoost function
y
Hotplate selection
1|2|3|4| Control panel
Ú
Sensor frying system
M
Timer
Hotplate
Activating and deactivating
$
Single-cir-
cuit hotplate
ð
Dual-circuit
hotplate
Select the hotplate and touch the
@
sym-
bol
ò
Tri-circuit hot-
plate
Select the hotplate, touch the
@
symbol;
the 2nd filament circuit is activated
Touch the
@
symbol again; the 3rd fila-
ment circuit is activated
q
Roaster hot-
plate
Select one of the two roaster hotplates,
touch the symbol
@
; the 2nd hotplate and
roaster are activated.
Activating the hotplate: the corresponding indicator lights
up.
