background image

14

Selecting the options menu

The cooktop must be switched off.

1

Switch on the cooktop.

2

Within the next 10 seconds, touch the 

M

 symbol for 

4 seconds.

 and 

 flash alternately in the left-hand display; 

 

lights up in the right-hand display.

3

Touch the 

M

 symbol repeatedly until the required 

indicator appears in the left-hand display. 

4

Set the required value in the settings range.

5

Touch the 

M

 symbol for 4 seconds.

The setting is activated.

Switching off

To exit the basic setting, switch off the hob with the 
main switch and make new settings.

Cleaning and care

The information in this section provides help on how 
best to care for your hob.

Suitable maintenance and cleaning products can be 
purchased from the after-sales service or in our e-Shop.

Ceramic

Clean the hob after each use. This will prevent spills 
from burning onto the ceramic.

Only clean the hob when it has cooled down sufficiently.

Use only cleaning agents which are suitable for ceramic. 
Follow the cleaning instructions on the packaging.

Never use:

Undiluted washing-up liquid

Detergent intended for dishwashers

Scouring agents 

Harsh cleaning agents such as oven spray or stain 
remover

Abrasive sponges 

High-pressure cleaners or steam jet cleaners

Ground-in dirt can be best removed with a glass 
scraper, available from retailers. Please note the 
manufacturer's instructions.

You can also obtain a suitable glass scraper from our 
after-sales service or from the e-Shop.

Hob surround

To prevent damage to the hob surround, observe the 
following instructions:

Use only hot soapy water.

Wash new sponge cloths thoroughly before use.

Do not use any sharp or abrasive agents.

Do not use the glass scraper.

Summary of Contents for CE291 Series

















Reviews: