Gaggenau BS455101, User Manual And Installation Instructions

Page: 28 / 64

en
Cleaning and servicing
28
Appliance door
Area Suitable cleaning agents Information
Door panel
¡
Glass cleaner Do not use a glass scraper.
Clean with a window cloth or a microfibre cloth.
Door seal
¡
Hot soapy water Clean with a dishcloth.
Do not remove or scrub.
Do not use metal scrapers or glass scrapers for cleaning.
Display
¡
Soapy water Wipe down using a microfibre cloth or a slightly damp cloth.
Do not wipe with a wet cloth
Cooking compartment
Area Suitable cleaning agents Information
Cooking compart-
ment inner walls
¡
Hot soapy water Clean with a dish cloth and dry with a soft cloth.
Stainless steel cleaner that is suitable for the appliance can be ob-
tained from customer service or online.
To prevent corrosion, remove any patches of limescale, grease,
starch or albumin (e.g. egg white) from stainless steel surfaces im-
mediately. Corrosion may form under such stains.
Do not use oven spray or other aggressive oven cleaners or abras-
ive materials. Scouring pads, rough sponges and pan cleaners are
unsuitable. These items scratch the surface.
Always dry the cooking compartment after cleaning.
→
"Drying programme", Page 31
Note:
Undissolved detergent causes patches to appear when heat-
ing up and these patches cannot be removed. Thoroughly remove
residues from detergents or care products using clean water before
drying the cooking compartment.
Very dirty cooking
compartment
¡
Cleaning programme The cleaning programme → Page 29 removes stubborn dirt.
Glass ceramic
grilling surface
¡
Glass ceramic cleaner Regularly clean with glass ceramic cleaner.
Do not use a glass scraper.
Glass cover for
the cooking com-
partment light
¡
Hot soapy water Clean with a dishcloth.
Water tank
¡
Hot soapy water
¡
Dishwasher
To remove residual detergent after cleaning, rinse thoroughly with
clean water.
Clean in the dishwasher as necessary.
Remove the lid and place the water tank upside down in the dish-
washer.
Note:
Before fitting the lid, ensure that the suction hose is free of
residues.
→
"Check the water tank", Page 35
After cleaning, leave the water tank to dry with the lid open.
Wire racks
¡
Dishwasher
¡
Hot soapy water
Note:
If required, remove the shelf supports for cleaning.
→ "Removing the shelf supports", Page 33
In the event of heavy soiling, leave to soak and use a brush.
Cooking con-
tainer, wire rack
¡
Dishwasher
¡
Hot soapy water
Soak burnt-on remnants and remove with a brush.
Light-coloured patches on stainless steel are caused by protein
residues. Remove these stains with lemon juice. Rinse thoroughly
with clean water.
Core temperature
probe
¡
Hot soapy water Wipe with a damp cloth
Do not clean in the dishwasher.