Gaggenau BS455101, User Manual And Installation Instructions

Page: 15 / 64

Timer functions
en
15
a
Once the appliance reaches the set temperature, a
signal tone sounds and the heating symbol goes
out
​⁠.
Notes
¡
If you select a different type of heating, the temper-
ature that has been set is retained.
The display only shows the suggested temperature
once the appliance has been switched on.
¡
If the water tank is empty, the display shows a mes-
sage.
→
"Fill the water tank", Page 14
7.5 Switching off the appliance
▶
Turn the function selector to ​⁠.
Depending on the type of heating, you may hear an
automatic rinse cycle running.
7.6 Steam injection
During steam injection, the appliance injects steam into
the cooking compartment. This enables you to bake
food such as bread and bread rolls with sufficient mois-
ture. It also gives yeast-risen baked goods a smooth,
shiny crust.
Steam injection only works with the following types of
heating:
¡
Hot air + 30% humidity ​⁠
¡
Hot air + 0% humidity ​⁠
¡
Full surface grill + air recirculation ​⁠
Starting steam injection
1.
Before heating, ensure that there is water in the
fresh-water tank.
If the fresh-water tank is empty, ​⁠ is not shown in
the display.
2.
Press ​⁠.
a
After a short time, the appliance injects steam into
the cooking compartment.
a
Steam is injected for approx. 5 minutes.
Cancelling steam injection
▶
Press ​⁠.
7.7 After each use
After a type of heating with steam, empty, clean and
dry the fresh-water tank and process-water tank. Dry
the cooking compartment to ensure that no moisture
remains in the appliance and to prevent odour from
building up.
WARNING ‒ Risk of scalding!
Hot steam may escape when you open the appliance
door. Steam may not be visible, depending on the tem-
perature.
▶
Open the appliance door carefully.
▶
Keep children at a safe distance.
Emptying the water tank
ATTENTION!
Heat damages the water tank.
▶
Do not dry the water tank in the hot cooking com-
partment.
1.
Open the appliance door carefully.
Hot steam escapes.
2.
Remove, empty, clean and dry both water tanks.
Drying the cooking compartment
1.
Remove food residues and/or dirt from the cooking
compartment as soon as the appliance has cooled
down.
Burnt-on food residue and/or dirt will be much
harder to remove later.
2.
Once the cooking compartment has cooled down,
wipe it out and dry it thoroughly with a soft cloth.
3.
If necessary, wipe dry any condensation on units or
handles.
4.
If required, you can use the drying programme to
dry the cooking compartment quickly. Drying pro-
gramme →
Page 31
7.8 Switching on the appliance after a safety
switch-off
Requirement:
After prolonged operation, the safety
switch-off function → Page 11 switches off the appli-
ance.
1.
Turn the function selector to ​⁠.
2.
Switch the appliance back on again.
8 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
8.1 Overview of the timer functions
Use ​⁠ to select the different timer functions.
Timer function Use
Short-term timer
Cooking time
1
Cooking time end
1
Stopwatch
1
Not available in standby mode
8.2 Calling up the timer menu
Note:
You can call up the timer menu from any operat-
ing mode. The timer menu is not available if you turn
the function selector to ​⁠ in the basic settings.
▶
Press ​⁠.
a The display shows the timer menu.
8.3 Exiting the timer menu
▶
Press ​⁠.
a The timer menu is closed.
a
Any settings that are not saved are lost.
Note:
You can exit the timer menu at any time.