manualshive.com logo in svg

G.T.Power E6D, Operating Instructions Manual, Page: 22 / 22

Share
Download
G.T.Power E6D Operating Instructions Manual Download Page 22

15. Specifications

Operating voltage range:                               11.0-18.0V DC

                                                                       AC 100-240V(50/60Hz)

Circuit power:                                                 Charge max.90W at DC input

                                                                                    max.50W at AC input

                                                                       Discharge max.5W at AC/DC input

Charge current:                                              0.1-6.0A

Discharge current:                                          0.1-1.0A

NiCd/NiMH battery cell count:                        1-15 cells

Lithium battery cell count:                               1-6 series

Pb battery voltage:                                          2-22V

Battery data memory:                                     10 memories per program

Battery capacity range:                                   100-65000mAh

Delta-peak sensitivity:                                     Disable/Delicate/5-20mV adjustable

Temperature cut-off range:                              20-80C/68-176F

Trickle charge current:                                     Off, 50-300mA adjustable (N/A for Lixx)

Cycle count:                                                    1-10times (N/A for Lixx)

Weight:                                                            750g

Dimensions:                                                    155x140x60mm

16. Warranty and service

We warrant this product for a period of one year (12 months) from the date of purchase.

The  guarantee applies only to such material or operational defects, which are  present at 
the  time  of  purchasing  the  product.  During  that  period,  we  will  repair  or  replace  without 
service charge any product deemed defective due to those causes. Any repairs carried out 
under warranty do not extend the original warranty period. You will be required to present 
proof of purchase (invoice or receipt). The defective unit has to be sent to us by pre-paid 
delivery;  we  will  pay  for  return  shipping  cost.  This  warranty  does  not  cover  the  damage 
due to wear, overloading, incompetent handling or using of incorrect accessories.

Manual of the charger E6D

20

Summary of Contents for E6D























Reviews:

No comments