manualshive.com logo in svg

G.T.Power E6D, Operating Instructions Manual, Page: 2 / 22

Share
Download
G.T.Power E6D Operating Instructions Manual Download Page 2

Contents

1. Special features --------------------------------------------------------------

 

1

2. Exterior of the charger -----------------------------------------------------

 

2

3. Warnings and safety notes -----------------------------------------------   3
4. Program flow chart ---------------------------------------------------------- 5
5. The first display 

 

------------------------------------------------------------  6

6. Initial parameter set up  ---------------------------------------------------  6
7. Lithium battery ( Lilo/LiPo/LiFe) program  -----------------------------

 

8

7.1  Parameter set-up for Lithium battery(Lilo/LiPo/LiFe) –----------------------------------------  8

7.2  Select program and start the process   -----------------------------------------------------------

 

10

8. NiMH/NiCd battery program

 

-------------------------------------------- 11

8.1  Parameter set-up for NiCd/NiMH battery  -------------------------------------------------------

 

11

8.2  Select program and start the process  -----------------------------------------------------------

 

13

9. Pb (Lead-acid) battery program  --------------------------------------- 14

 

9.1  Parameter set-up for Pb battery  ------------------------------------------------------------------ 14

9.2  Select program and start the process  ----------------------------------------------------------- 15

10. Screen displays during process -------------------------------------- 15

11. Review the date after finishing the progress —------------------- 16
12. Warning and error messages

 

----------------------------------------- 17

13. Battery status view   ----------------------------------------------------  19

14. Glossary of terms  ------------------------------------------------------- 19

15. Specifications  ------------------------------------------------------------

 

20

16. Warranty and service ---------------------------------------------------  20

Manual of the charger E6D

Summary of Contents for E6D























Reviews:

No comments