manualshive.com logo in svg

G.T.Power E6D, Operating Instructions Manual, Page: 10 / 22

Share
Download
G.T.Power E6D Operating Instructions Manual Download Page 10

These  programs  are  only  suitable  for  charging  and  discharging  Lithium  batteries  with  a 
nominal  voltage  of  3.3V,3.6V  or  3.7V  per  cell.  These  batteries  need  to  adopt  different 
charge technique is termed constant voltage (CV) and constant current(CC) method. The 
charge current varies according to the battery capacity and performance.

Select 'CHG/DCHG' program at main menu by pressing 'UP' or 'DOWN' button, and press 
'ENTER' to go for the program.

You can choose the type of battery to be charged or discharged at the first section. Select 
LiPo, LiFe or Lilo according to your battery. And then, select the number already set up for 
re-use. If you have the set-up data which had been performed successfully before, you can 
just  start    the  process  after  loading  the  data  number.  All  set  up  data  will  be  stored  at 
charger's memory automatically after setting them all. Input the cell-count and capacity of 
the battery will be charged at the top line of menu. The cell-count and capacity need to be 
matched with the battery.

Use 'UP' or 'DOWN' button to scroll up and down the menu, and change the value by using 
'INC' or 'DEC' button. To start the process, press and hold 'ENTER' button for more than 3 
seconds regardless of cursor position.

-Chg current: Set the charge current. (0.1A-6.0A)

-Dchg  current:  Set  the  discharge  current.  The  value  may  not  exceed  1C  for  a  maximum 
safety. (0.1-1.0A)

-Dchg  voltage:  Set  the  final  voltage  per  cell  at  the  end  of  discharge.  The  final  voltage 
should not be under the voltage level that is recommended by the battery manufacturer to 
avoid deep discharging. The default values are 3.00V/cell(LiPo/Lilo) and 2.00V/cell(LiFe).

START
ENTER

7. Lithium battery ( Lilo/LiPo/LiFe) program

7.1 Parameter set-up for Lithium battery(Lilo/LiPo/LiFe)

LiPo  

[0]    1C  5000mAh

Chg current:                                    0.1A
Dchg current:                                  0.1A
Dchg voltage:                              Default
End current:                                     Auto
Chk time:                                       10min
Safety temp:                                     50C

LiPo  

[0]    1C  5000mAh

Chg current:                                    0.1A
Dchg current:                                  0.1A
Dchg voltage:                              Default
End current:                                     Auto
Chk time:                                       10min
Safety temp:                                     50C

LiPo  

[1]    1C  5000mAh

Chg current:                                    0.1A
Dchg current:                                  0.1A
Dchg voltage:                              Default
End current:                                     Auto
Chk time:                                       10min
Safety temp:                                     50C

LiPo

LiFe
LiIo
NiMH
NiCd
Pb

 

Manual of the charger E6D

8

DC:   90W    IV:   12.25V

CHG/DCHG

Summary of Contents for E6D























Reviews:

No comments