manualshive.com logo in svg

G.T.Power E6D, Operating Instructions Manual, Page: 16 / 22

Share
Download
G.T.Power E6D Operating Instructions Manual Download Page 16

This is programmed for charging Pb(lead-acid) battery with nominal voltage from 2 to 22V 
Pb batteries are totally different from NiCd or NiMH batteries, but very similar with Lithium 
batteries.  They  can  only  deliver  relatively  lower  current  compare  to  their  capacity  ,  and 
similar  restrictions  apply  to  charge.  So  the  optimal  charge  current  will  be  1/10  of  the 
capacity, and Pb batteries must not be charged rapidly. Always follow the instruction which 
was supplied by the battery manufacturer.

Select 'CHG/DCHG' program at main menu by pressing 'UP' or 'DOWN' button, and press' 
ENTER' to go for the program.

Select 'Pb', then select the data number which will newly set up, or load the data number 
already  set  up  for  re-uses.  If  you  have  the  set-up  data  which  had  been  performed 
successfully before, you can just start the process after loading the data number. All set up 
data will be stored at charger's memory automatically after setting them all.

Input the cell-count and capacity of the battery will be charged at the top line of menu. The 
cell-count and capacity need to be matched with the battery.

Use  'UP'  or  'DOWN'  button  to  scroll  up  and  down  the  menu,  and  change  the  value  by 
using 'INC' or 'DEC' button. To start the process, press and hold 'ENTER' button for more 
than 3 seconds regardless of cursor position.

- Chg current:

 Set the charge current.(0.1-6.0A)

-  Dchg  current:

  Set  the  discharge  current.  The  value  may  not  exceed  1C  for  maximum 

safety.(0.1-1.0A)

-  Chg  voltage:

  Set  the  final  charge  voltage  per  cell. The  charger  will  charge  the  battery 

until the voltage has been reached. The default values is 2.45V/cell. (2.20-2.50V/cell)

- Dchg voltage:

 Set the final voltage which the battery will reach at the end of discharge. 

The default value is 1.5V/cell. (1.4-1.8V/cell)

Pb   

 

[0]       1C  5000mAh

Chg current:                                    0.1A
Dchg current:                                  0.1A
Chg voltage:                              Default
Dchg voltage:                                Default
End current:                                     Auto
Trickle curr:                                  100mA

Pb 

  

 

[0]       1C  5000mAh

Chg current:                                    0.1A
Dchg current:                                  0.1A
Dchg voltage:                              Default
Delta peak:                                  Default
End current:                                     Auto
Trickle curr:                                  100mA

LiPo
LiFe
LiIo
NiMH
NiCd

Pb

 

9. Pb (Lead-acid)battery program

Pb

 

   

 

[0]       1C  5000mAh

Chg current:                                      0.1A
Dchg current:                                    0.1A
Chg voltage:                                  Default
Dchg voltage:                                Default
End current:                                       Auto
Trickle curr:                                    100mA

START
ENTER

9.1 Parameter set-up for Pb battery

Manual of the charger E6D

14

DC:   90W    IV:   12.25V

CHG/DCHG

Summary of Contents for E6D























Reviews:

No comments