Fysic FDC-250, User Manual

Page: 8 / 20

-8-
6. OPERATION
6.1 To switch on/off:
Outdoor unit:
As soon as the batteries are installed or the adaptor is connected, the outdoor unit
will be enabled. The outdoor unit cannot be switched off.
Indoor unit:
Press and hold the button for 2 seconds to switch on the indoor unit.
Press and hold the button again for 4 seconds to switch off the indoor unit.
Attention: the indoor unit is NOT switched off automatically when placed
into the charger.
6.2 When the doorbell rings:
Upon pressing the push button, the push button will illuminate. A “ding dong” sound
will be emitted and the face of the visitor will be shown on the display of the indoor
unit.
• when the surrounding light is inadequate, the object lighting of the outdoor unit is
enabled
• a photo of the visitor is taken automatically and is stored in the memory of the
indoor unit (see also chapter 9)
- when you do nothing, the call is ended automatically after ± 20 seconds
- if you want to ignore this visit, press the button; the image of the visitor will
disappear from the display
- if you’d like to talk to your visitor, you may press the button to accept the call
After accepting the call:
• You may talk to your visitor through the built-in microphone and speaker in the
indoor unit and in the outdoor unit; please keep in mind NOT to hold the indoor
unit against your ear like a regular telephone
receiver. Leave the indoor unit in the charger
while talking to your visitor or keep the indoor
unit in your hand at approx. 30cm from your
mouth and speak at a normal voice volume
level.
• the volume of the speaker of the indoor unit may be adjusted using the and
buttons (the volume of the speaker of the outdoor unit is fixed and cannot be
changed).
• use the and buttons to set the screen brightness.
>30cm