Fysic FDC-250, User Manual

Page: 13 / 20

-13-
8. EXPANDING WITH MULTIPLE OUTDOOR UNITS
8.1 Introduction:
Up to a maximum of 4 outdoor units may be connected to a single indoor unit. In
this way you can guard multiple entrances to your company or home (main en-
trance, personnel entrance, warehouse, garden gate, and garage).
Additional outdoor units are available via the Fysic service department on tele-
phone number 073 6411 355 (Netherlands) or 03 238 5666 (Belgium) or via the
internet www.Fysic.nl
8.2 To register additional outdoor units:
Preparation for registration:
1. Install the batteries into the indoor unit and charge them.
2. Install the batteries into the outdoor unit or connect the adaptor to the unit
3. Keep both the indoor unit and outdoor unit handy
4. Keep a small screwdriver or paperclip handy
To register:
1. with the indoor unit on stand-by, first briefly press the but-
ton to wake up the indoor unit
2. press the MENU soft-button
3. use the and buttons to select the Register function
4. press 2x the SELECT soft-button; in the lower part of the
display ‘Searching...’ will appear.
5. press 1x the bell pusher of the
outdoor unit
6. now press and hold the register
button at the rear of the outdoor
unit until the camera lighting
starts flashing after several
seconds
7. the indoor unit and outdoor unit
are now searching for each
other; the registration is successful as soon as the indoor unit shows the image
of the outdoor unit; the number of the outdoor unit is indicated in the middle of
the display at the top