Fysic FDC-250, User Manual

Page: 12 / 20

-12-
7.6 To view photos:
Of each visitor pressing the doorbell a photo is taken automatically (
the automatic
snapshot function must be enabled
). You may view these photos as follows:
1. with the indoor unit on stand-by, first briefly press the button to wake up the
indoor unit
2. press the REPLAY button
OR
1. with the indoor unit on stand-by, first briefly press the button to wake up the
indoor unit
2. press the MENU soft-button
3. use the and buttons to select the Snap show function.
4. press the Select soft-button
Now the last photo taken will appear in the display.
The red letter in the upper part of the screen indicates which camera has taken the
photo.
The green digits represent the photo number.
Press the Del button to delete a photo.
Press the BACK button to leave the photo viewer.
7.7 Reset to factory settings:
1. with the indoor unit on stand-by, first briefly press the button to wake up the
indoor unit
2. press the MENU soft-button
3. use the and buttons to select the Default Set function.
4. press the Select soft-button and use the and buttons to choose
whether to perform a factory reset (Yes ) or not (No)
Factory settings:
volume: level 5
brightness: level 5
key tone: on
automatic 1 snapshot: on
photo memory: empty