10
code
cauSe & correctIVe
actIon
253
Temperature too low.
Warm up the device.
255
Received signal is too
weak or measurement
time is too long. Use a
target plate or a good
reflective surface.
256
Received signal is too
strong. The target is too
reflective. Use a target
plate or do not aim at a
strong light objective.
261
Outside of the range of
measurement. Select the
measurement distance
within the range of
measurement.
500
Hardware error. Switch the
device On/Off several
times. If the code still
appears contact your
distributor.
recyclIng and dISPoSal
Recycle unwanted materials instead
of disposing of them as waste. All
tools, hoses and packaging should
be sorted, taken to the local
recycling centre and disposed of in
an environmentally safe way.
Recycle rather than dispose of
unwanted material in landfill
whenever possible. The machine
must be delivered in rigid packaging
to avoid damage during
transportation. The packaging and
the machine itself are manufactured
from recyclable materials and
should be disposed of accordingly.
Only dispose of electrical/
electronic/battery terms in separate
collection schemes, which cater for
the recovery and recycling of
materials contained within. Your
cooperation is vital to ensure the
success of these schemes and for
the protection of the environment.
Recycle packaging where facilities
exist.
This symbol is known
as the Crossed out
Wheelie Bin Symbol.
When this symbol is
marked on a product or
battery, it means that it
should not be disposed of with your
general household waste. Some
chemicals contained within
electrical/electronic products or
batteries can be harmful to health.
SerVIce
Now that you have purchased your
tool, should a need ever exist of
repair or service, simply contact
your nearest FXA Authorised Service
Centre or other qualified service
organisation. Be sure to provide all
pertinent facts when you call or visit.