Section 50
00-02-1033
2018-12-03
- 11 -
User-Configurable Screens
The Centurion has (9) user-configurable pages of (4) types. The Centurion Configuration Tool software
allows users to configure up to nine (9) screens with controller input signal groupings. Possible custom
screen types may include:
a) Custom Line by Line allows users to display process data in a list format with description and
value.
b) Custom Gage allows user to display four (4) most important pieces of data on a 2 x 2 table in
larger font.
c) Custom Control Loop allows user to display Control Loop functions. The control output will be
displayed as a percentage of the range.
d) Custom Generic Register allows user to display up to 20 items on a page that can be mapped to
the Centurion Modbus map and given a label.
For more information on configuring the optional screens through the Centurion Configuration Tool,
please refer to the Configuration Tool Quick Start Guide.
Map of Operational Screens, MV-5-C Display
From the Home / Gage screen, use the left and right arrows to view the Operating Screens. A password
is not required to view these screens.
Some screens are application specific and may not be used.
Home Gage
Screen
Shutdown
Snapshot
Event
History
Active
Alarms
Temperature
Input
Digital
Input Status
Line-By-Line
Screen
Shutdown
History
Firmware
Bootloader
Configuration
Screen
Logo
Screen
Control
Loop
Rod
Load
Summary of Contents for Centurion C5
Page 16: ......
