Ver.1.1
33
INI (initializing memory registers)
[Format]
INI
[Response]
P0: Norm al end
N0: Co mmand error
[Function]
- This command resets all memory registers of the FDP02 to initial settings.
- All register settings that are customized are vanished.
[Example of use]
>@INI<Cr><Lf>: This command initializes all memory registers.
<P0<Cr>Lf>:
This response indicates the normal end of command processing.
The host cannot receive any response from the FDP02 if a
communication parameters such as baud rate are different from default
setting.
It will take 520ms at maximum for P0 response of this command.
Memory registers may get damages if the power of FDP02 is turned
off before the P0 response comes back.
