Ver.1.1
28
8.3.3 Explanation of commands
ARG (Show all registers)
[Format]
ARG
[Response]
List of register settings (REG00 to REG26)
N0: Command error
[Function]
- The FDP02 returns all register settings by this command.
- The register settings are shown in hexadecimal code.
[Examples of use]
>@ARG<Cr><Lf>
<REG00: 00H<Cr><Lf>
<REG01: F0H<Cr><Lf>
・
・
・
<REG26: 01H<Cr><Lf>
BCL (Clear transmission and reception buffers)
[Format]
BCL
[Response]
P0: Norm al end
N0: Co mmand error
[Function]
- The transmission and reception buffer is cleared by this command.
[Examples of use]
>@BCL<Cr><Lf>
<P0<Cr><Lf>
If this command is executed during data transmission in broadcast transmission
mode, newly in coming data might be stored and output after the buffer is
cleared.
Also, serial data output is stopped when this command is executed during serial
data output.
