GOAL of EXAMPLE:
STEPS:
INPUTS:
Other Examples:
RUD-THR
(
HELI
) mix: When right rudder is applied, additional torque is needed from the motor to drive the tail left. Left
rudder requires less torque. A rudder-throttle mix, positive on the left side and negative on the right, adjusts for this.
RUD-ELEV
(
ACRO
) mix: Compensate for pitching up or down when rudder is applied.
ELEV-PIT
(
HELI
) mix: compensate for the loss of lift of tilting the model.
55
Set up a Smoke system:
ON
when
S
WITCH
E
is in the
down position.
*Adjust the
CH7
switch to
NULL
prior to this setting. See page. 28.
Where next?
Open an unused programmable mix.
(Ex: use
PROG
.
MIX3
.)
Activate the function.
Choose master and slave channels.
Assign
S
WITCH
and position.
(Ex:
E DOWN
.)
Set rates. (Ex: Lo=10
0%
, Hi=
0%
.)
Set
OFFSET
, if needed.
Close menu.
for 1 second.
(If
basic
,
again.)
to
PROG
.
MIX3
.
to
E DOWN
.
to
CH3
.
T
HROTTLE
S
TICK
past center.
T
HROTTLE
S
TICK
past center.
Stick
to desired point.
for 1 second to set.
View numerous additional mix setups:
www.futaba-rc.com\faq\faq-7c.html.
to
CH7
.
to +10
0%.
to
0%.
