FLAP-TRIM
allows the flap action to be set in a way that it can be adjusted with the
VR
dial.
AIRBRAKE
will also move the flaps to a specified position via movement of a switch.
The flaps can also be moved with switch using a programmable mix. See offset as master
p.53.
44
Add
FLAP-TRIM
to allow the model's
ailerons to drop 30% together as flaps
from the
VR
dial.
The
FRAPERON
function must be
active with the second servo set to CH6.
*If the
FLAP-TRIM
is inhibited the flap control defaults to the
VR
dial. You can use
E.POINT
to set the travel of the flap if you are using one flap servo.
If you are using flaperons with
CH1
and
CH6
DO NOT inhibit
FLAP-TRIM
.
Open
FLAP-TRIM
.
Set the dial to desired zero flap side.
Set the dial to desired full flap side.
Set flap throw (Ex 30%).
Set the
OFS
so that the flap will work
for the full range of the dial.
Close menu.
for 1 second.
(If
basic
,
again.)
to
to 30%.
full left.
full right.
FLAP-TRIM.
The function is automatically activated with the
FRAPERON
.
