MODEL COPY
: copies the current model data into another model memory in the transmitter.
The number of the model memory you are copying from and
into is displayed.
Notes:
•
Any data in the model copied
to
will be written over and lost, including name, type and
modulation. It
cannot
be recovered.
•
With the trainer
FUNC
mode it is
not
necessary to have the student radio contain the
setup of the aircraft. See
TRAINER
, p. 38.
Examples:
•
Start a new model that is similar to one you have already programmed.
•
Copy the current model data into another model memory as a backup or before experimenting with new settings.
•
Edit a copy of your modelís data to fly the model in different conditions (i.e. Helicopter using heavier weight blades;
airplane model at extreme altitudes).
GOAL of EXAMPLE:
STEPS:
INPUTS:
*Radio shows progress on screen as the model memory is being copied. Note that if the power switch is turned off prior to completion,
the data will not be copied.
26
Copy model 3 into model 5.
NOTE: This is one of several
functions for which the radio requires
confirmation to make a change.
Where next?
Open the
BASIC
menu, then open
MODEL
submenu.
Confirm you are currently using the
proper model memory. (Ex: 3)
Go to
MODEL COPY
and choose the
model to copy
into
. (Ex: 5)
Confirm your change
.
Close.
for 1 second.
(If
ADVANCE
,
again.)
to
MODEL
.
If
SELECT
does not indicate 3,
use
MODEL SELECT
, p. 25.
to
5
.
for 1 second.
sure?
displays.
*
SELECT
the copy you just made: see p. 25.
Rename it (it is currently named
exactly
the same as the model copied): see p. 25.
