47
Functions
(Initial screen)
Use the
or
button to select the
menu screen.
Press the
button.
Use the
or
button to select the
function.
Press the
button.
Calling the setup screen
* When the direct call button is set,
the setup screen is also called by the
following method:
MENU SELECT
DIRECT SEL
Press the
and
button simulataneously.
Press the button set
at this function.
* Calling from menu screen
Use the
or
button to
select the setup item.
*
blinks at the current
setup item.
(Initial screen)
MENU
Setup items
ABP
: Brake return amount
DLY
: Delay amount
CYC
: Cycle speed
MODE : Function ON/Off
THP
: Operation point
DTY
: Cycle duty ratio
STM
: Steering mixing
* When brake operation enters the set
range, "*" is displayed in front of the
number.
* When steering mixing is set and
steering operation enters the set
range, "*" is displayed in front of the
number. When mixing is OFF, the
A.B.S function can operate over the
entire steering range.
* A bar graph that shows the oper-
ating position of the throttle stick
appears. During setup, A.B.S func-
tion operation can be checked at
this bar graph.
Delay amount
0 ~ 100
Initial value; 0
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Return to the initial value by pressing
the (+) and (-) buttons simultaneously
(approx. 1 sec).
Brake return amount
0 ~ 50 ~ 100
Initial value; 50
0%
100%
A.B.S. Function
A.B.S function adjustment
(Preparation)
- Select setup item "MODE" and make the following ad-
justments:
1 (Function ON/OFF)
Set the function to the active state by pressing
the (+) or (-) button.
"INH(OFF)"
: Function OFF
"ACT(ON)"
: Function ON
"ACT(OFF)"
: Switch OFF when setting switches
2 (Brake return amount adjustment)
Select setup item "ABP" by pressing the (UP)
button 3 times and use the (+) and (-) buttons to
adjust the return amount.
"0"
: No return
"50"
: Return to the 50% position of the brake operation amount
"100" : Return to the neutral position.
3 (Delay amount setup)
Select setup item "DLY" by pressing the (DN)
button once and use the (+) and (-) buttons to
adjust the delay amount.
"0"
: A.B.S. function performed without any delay
"50" : A.B.S function performed after an approximate 0.7 sec delay.
"100" : A.B.S. function performed after an approximate 1.7 secs delay.
Function ON/OFF
INH(OFF), ACT(ON), ACT(OFF)
