29
Initial Set-Up
レバー類の準備
"RF"
Instal set-Up
Preparations (Transmitter)
Before setting the Transmitter functions, check and set items 1 to 4 below.
(Display when power switch turned on)
When the power seitch is turned on, the currently selected model number is dis-
played. Check of this number is model number you want to set-up. To change the
model number, use the Model Select function (See page75).
1.RF Output Check
If signals are output normally, RF output monitor "RF"
will be displayed on the screen.
If "RF" is not displayed, check if the transmitter crystal
and RF module are installed.
If the transmitter is abnoemal or faulty, contact your
Futaba dealer.
Turn on the transmitter power.
(Start screen)
The model number is displayed.
