62
Functions
Timer/TIMER
DOWN TIMER setup
(Preparation)
- Use the function select switch function (See page 82) to
select the switch.
- Select "DOWN TIMER" at setup item "TYPE".
Setup items
RST
: (Indicates the reset state.)
ALRM : Alarm setup
PRAL : Prealarm setup
TYPE : Timer selection
Setup item switch
- Use the (DN) and (UP) buttons to switch the setup item.
Switches
LAP STA : Start/stop
LAP RES : Reset
Adjustment buttons
- Use the (+) and (-) buttons to make
adjustments.
- Press the (+) and (-) buttons simulta-
neously (approx. 1 sec) to return to the
initial screen.
Alarm time
OFF, 1 ~ 99 m
Initial value: 4 m
Prealarm time
OFF, 1 ~ 30 s
Initial value: 5 s
(Timer start/stop operation)
The switch (LAP STA) preset by function select switch function (See page 82) starts
the timer. Only start can be linked with the throttle stick.
(Timer reset operation)
In the timer-stopped state, the switch (LAP RES) preset by function select switch
function (See page 82) resets the timer.
1 (Alarm time setup)
Select setup item "ALRM" by pressing the (UP)
button twice, and use the (+) and (-) buttons to
set the alarm time.
2 (Prealarm time setup)
Select setup item "PRAL" by pressing the (DN)
button once, and use the (+) and (-) buttons to
set the prealarm time.
3 (Linking start with the throttle stick)
Select setup item "RST" by pressing the (UP)
button twice, and press the (+) and (-) buttons
simultaneously for about 1 second. A PeePee
sound is generated and "RST" > "RDY" blinks at
the timer display and the system enters the RDY
state. Throttle stick operation starts the timer.
4 When ending adjustment, return to the initial
screen by pressing the (END) button 3 times.
* Timer display
Status display
RST
: Reset state
RDY
: Throttle stick operation wait
RUN
: Timer running
STP
: Timer stopped
