Furuno NAVpilot-611, Installation Manual

Page: 10 / 68

1. INSTALLATION OF UNITS
1-4
1.3 Rudder Reference Unit FAP-6112
•
Leave sufficient space around all moving parts.
•
The unit must be coupled to the rudder as shown below, where the following conditions
are satisfied:
Use four self-tapping screws (supplied) to fasten the rudder reference unit.
350 mm <Y2 < 540 mm
X1 = X2
Y1 = Y2
X1
X2
Y1
Y2
90
Top view
Arrow mark
Note: The arm of rudder reference unit should be aligned with the arrow mark. Align the
notch on the shaft to the arrow mark if the arm is removed.