Furuno NAVpilot-611, Installation Manual

Page: 38 / 68

3. ADJUSTMENTS
3-10
3.2.13 Selecting compass type
Select the heading sensor connected to your Navpilot.
1. Rotate the course control knob to select “COMPASS TYPE.”
2. Press the course control knob to show the compass type options window.
PG-1000
OTHER
PG-500
Compass type options window
3. Rotate the course control knob to select PG-500, PG-1000 or OTHER depending on the
heading sensor connected. (Use OTHER for connection to a Furuno Satellite Compass
or Gyro Compass.)
If OTHER is selected, the auto variation compensation and self check function is not
available. (Use hybrid or gyro sensor only.)
4. Press the course control knob to finish.
3.2.14 Setting compass baud rate
Select the baud rate of the heading sensor connected.
1. Rotate the course control knob to select “COMPASS BAUD RATE”.
2. Press the course control knob to show the compass baud rate options window.
9600
19200
38400
4800
Compass baud rate options window
3. Rotate the course control knob to select the baud rate from among 4800, 9600, 19200
and 38400 bps.
For PG-500, select 4800 bps (default setting).
4. Press the course control knob to finish.