Furuno NAVpilot-500, Installation Manual

Page: 51 / 67

3. ADJUSTMENTS
3-21
Using
settings
selected on other control unit
You can use the display settings selected on other control unit.
1. Open the SYSTEM SETUP menu.
2. Rotate the course control knob to select “RECEIVE SCREN SETUP NO”.
3. Press the course control knob to show the optional window.
4. Rotate the course control knob to select the control unit No. from which you want to
copy settings.
5. Press the course control knob.
Confirming the input sentences
The RECEIVING SENTENCE window shows the current input sentences.
1. Open the SYSTEM SETUP menu.
2. Rotate the course control knob to select “RECEIVING SENTNECE”.
3. Press the course control knob to show the RECEIVING SENTENCE window.
RECEIVING SENTENCE
AAM BWR GCC HDM RMC VWT
APA DBT GNS MTW VBW WPL
APB DPT GTD MWV VHW XTE
BOD GGA HDG RMA VYG ZDA
BWC GLC HDT RMB VWR
PUSH MENU KEY TO RETURN
TO PREVIOUS MENU.
Current
input
sentence
Receiving sentence window
4. Confirm the current input sentences (in reverse video).
5. Press the [MENU] ([TURN/MENU]) key to close the window.