Furuno NAVpilot-500, Installation Manual

Page: 33 / 67

3. ADJUSTMENTS
3-3
3.2.2 Selecting the type of rudder reference unit
Select the type of your rudder reference unit at here.
1. Rotate the course control knob to select “SELECT RRU”, and then press the course
control knob.
The select RRU options window appears.
LINEAR SENSOR
FURUNO RRU
Select RRU options window
2. Rotate the course control knob to select FURUNO RRU or LINEAR SENSOR.
FURUNO RRU: The rudder reference unit FAP-6111 is connected.
LINEAR SENSOR: The Teleflex
®
linear sensor AR4102 or AR4302 is connected.
3. Press the course control knob to close the window.
When selecting LINEAR SENSOR, change the JP2 position certainly referring to paragraph
2.2.4.
3.2.3 Bleeding air in the oil cylinder
If necessary, bleed air from the oil cylinder by moving the rudder automatically or manually.
WARNING
Confirm that no one is near the rudder
when bleeding air from oil cylinder.
The rudder may move unexpectedly,
possibly causing bodily injury.
1. Rotate the course control knob to select “AIR BLEEDING”, and then press the course
control knob to show the air bleeding options window.
USE ARROW KEYS
USE RRU
NO
USE KEYS
USE RRU
NO
Navpilot-500 Navpilot-511
Air bleeding options window
2. Rotate the course control knob to select USE ARROW ( ◄► ) KEYS or USE RRU as
appropriate.
3. Press the course control knob to show the rudder indicator.
AIR BLEEDING
40 20 10 5
5 10 20 40
0
PUSH ARROW KEYS TO ENABLE
PUMPSET.
PUSH MENU KEY WHEN DONE.
AIR BLEEDING
40 20 10 5
5 10 20 40
0
TURN RRU ARM TO ENABLE
PUMPSET.
PUSH MENU KEY WHEN DONE.
USE ARROW KEYS USE RRU
Rudder indicators (ex. Navpilot-500)