.
Page 20
11/16/01
E. HEADING INFORMATION
Heading information may be connected to any NavNet display. The NavNet displays will
accept both AD-10 FURUNO heading data, or NMEA 0183 HDM or HDG sentence. The
NavNet display will automatically detect the presence of heading and send it to every other
display in the network. There are no menu settings that need to be changed to make this
happen. Please note the following:
- Only one heading input to one Radar Display per network is needed.
- The heading information MUST be input to the RADAR display in a multiple
display configuration.
- Heading may be accepted as an NMEA 0183 signal, but NavNet displays are
not capable of repeating NMEA0183 heading information out to other
equipment via the NMEA 0183 port
.
- AD10 HEADING FORMAT IS MANDATORY for ARP11 INSTALLATIONS.
F. SMART SENSOR CONFIGURATIONS
The Furuno Smart Sensor provides digital depth, water temperature, and water
speed(Transom Mount Only) data to a NavNet or RD30 Display in NMEA0183 format.
A Smart Sensor may be plugged in directly to the DATA1 port on any NavNet display.
If the DATA1 port is occupied by the GP-310B, you can use a Y-Adapter Cable, AIR-033-407
or a terminal strip to connect the Smart Sensor to any NavNet Display’s 7-Pin
Buz/RS232/12VDC/NMEA In Port.
A variety of Smart Sensor installations are possible for Cruising and Fishing vessels with or
without the Network Sounder. Several installation examples are provided below:
Smart Sensor Installation Example #1 – Y-Adapter Configuration to DATA3/DATA4
Use the Y-Adapter Cable to plug the Smart Sensor directly into the DATA3 or DATA4(10.4”LCD) on any
NavNet Display. The Y-Adapter’s Pig Tail also provides NMEA0183 Output to an autopilot, VHF DSC, or
PC.
AIR-033-407
Y-Adapter Smart Sensor to NavNet Display
DATA1
Smart Sensor
GP-310B or
other Pos.
Source to
DATA1
Y-Adapter Cable
P/N AIR-033-407
DATA3/DATA4
7-pin conn.
WHITE - RS232C TD(+)/NMEA0183 Out(+)
BLUE - RS232C RD(-)
RED - +12VDC Out
(<100mA Buzzer Relay Only)
BLACK – EXTERNAL BUZZER OUTPUT
SHIELD - GND/SIG(0) Volt/NMEA0183 Out(-)
-This configuration can be used for single or multiple
NavNet Display Systems.
-It is recommended for the Main NavNet Display when
the Operator may not wish to turn on the second or
third NavNet Display at a Flybridge or Tuna Tower.
