1-49
1.35.3 Storing the map data
When you have made a map, store it with a map number as follows:
1. Press [NAV MENU], [1] to display the RADAR MAP menu.
2. Press the [7] key to show the ENTRY MAP menu.
3. Press the [2] key and enter map number by numeral key, followed by the [ENTER] key.
4. Press the [NAV MENU] key to leave this menu.
1.35.4 Displaying a radar map
1. Press [NAV MENU ], [1] to display the RADAR MAP.
2. Press the [3] key and enter the map number you want to display.
3. Press the [ENTER] key.
000
010
020
030
040
050
060
070
080
090
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
W012
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
,,,,,,,,
W011
North marker
Heading marker
Waypoint
Navline
Own ship safe contour
Heading line
Planned route
Own ship vector
Approximate coastline
Waypoint
Past position
ARPA: Equally time-spaced positions of any targets being tracked.
Note-not equally geographically spaced.
EPA: Past plot positions may not be equally time-spaced, up to the
operator.
Target being tracked
Separation zone
Dangerous side of own
ship safe contour may be
marked like this.
Figure 1-47 Sample radar map
4. Press [1], [7] in that order to display the NAV LINE menu.
5. Press the [4] key twice to select NAV WIDTH ON and enter navigation width in nautical
mile.
6. Press the [ENTER] key followed by the [NAV MENU] key.
