6-4
6.4
Set-up of Video Plotter Display
6.4.1
Hiding/Showing graphics
1. Press [NAV MENU], [8] to display the PLOT DISP SELECT menu. Current selections
appear in reverse video. Blank items have been turned off on the VIDEO PLOTTER
INITIAL SETTING menu. For further details see paragraph 6.10 Initial Settings.
[PLOT DISP SELECT]
1 [VIDEO PLOTTER 1]
2 DANGER HIGHLIGHT
OFF/ON
3 COAST LINE
OFF/ON
4 LAND DENSITY
OFF/ON
5 PLACE NAME
OFF/ON
6 MARK
OFF/ON
7 OWN SHIP PLOT
OFF/SEPARATE/CONTINUE
8 TARGET PLOT
OFF/ON
9 CONTOUR LINE
OFF/ON
0 GRID
OFF/ON
Figure 6-3 PLOT DISP SELECT menu
2. Press appropriate numeral key twice to hide or show graphic.
3. Press the [ENTER] key.
4. Repeat steps 2 and 3 to hide or show other graphics.
5. Press the [NAV MENU] key to close the menu.
Note: LAND DENSITY fills (ON) or hollows (OFF) land on an electronic chart. Land will be
hollow when wrong card or wrong scale is used regardless of LAND DENSITY setting.
6.4.2
Hiding/Showing nav data
You may select what navigation data to display on the video plotter display as follows:
1. Press the [NAV MENU] key to display the NAV INFORMATION 1 menu.
[NAV INFORMATION 1]
1 [VIDEO PLOTTER 1]
2 SELECT NAVAID
GPS+LC/DEAD RECKONING
3 OWN SHIP POSN
OFF/ L/L
4 POSN
xx
°
xx.xxx N/S
xx
°
xx.xxx E/S
5 +CURSOR DATA
OFF/ L/L
6 WPT DATA
OFF/REL/TRUE
7 [NAV LINE]
8 [WAYPOINT]
9 WIND DATA
OFF/ON
0 [NAV INFORMATION 2]
Figure 6-4 NAV INFORMATION 1 menu
2. Press appropriate numeral key to select both item and option. Press the [ENTER] key
to register selection.
