Furuno FELCOM19 Inmarsat Mini-C MES, Installation Manual

Page: 3 / 51

i
SAFETY INSTRUCTIONS
Standard Steering
Antenna Unit IC-119
Communication Unit IC-219
AC/DC Power Supply Unit
PR-240
Do not open the equipment
unless totally familiar with
electrical circuits and
service manual.
Only qualified personnel
should work inside the
equipment.
Turn off the power at the
mains switchboard before
beginning the installation.
Post a sign near the switch
to indicate it should not be
turned on while the equip-
ment is being installed.
Fire, electrical shock or
serious injury can result if the
power is left on or is applied
while the eqiuipment is being
installed.
ELECTRICAL
SHOCK
HAZARD
0.30 m 0.30 m
0.30 m 0.30 m
Do not approach the
radome closer than 0.5 m
when it is transmitting.
Microwave radiation can
cause severe injury or
illness. Radiation level:
10 W/m
2
at 0.5 m
0.90 m 0.60 m
WARNING CAUTION
Junction Box IC-318
SSAS Alert Unit IC-307
0.90 m 0.60 m
0.70 m 0.45 m
Ground the equipment to prevent
electrical shock and mutual
interface.
Use the correct fuse.
Confirm that the power supply
voltage is compatible with the
voltage rating of the equipment.
Connection to the wrong power
supply
can cause fire or equipment
damage. The voltage rating appears
on the label at the rear of the
terminal unit.
Use of wrong fuse can result in
damage to the equipment.
Keep the following compass
safe distances.