manualshive.com logo in svg

Furuno FELCOM 15, Operator'S Manual, Page: 44 / 210

Share
Download
Furuno FELCOM 15 Operator'S Manual Download Page 44

2. SYSTEM INITIALIZATION 

 

2-12

Note:

  The terminal unit must be “idle” to login. (“Current State: IDLE” 

appears at the bottom of the screen.) When it is not idle, “Ignored: 
MES is not idle.” appears. Press the [Esc] key to return to the standby 
display. Wait until the terminal unit becomes idle.   

4.  Yes is selected; press the [Enter] key to start login. 
5.  Login begins and the screen should now look something like the illustration 

below, with “LOGIN” flashing. 

Current State: LOGIN
CALLING
DCE F15 Ver. **

02-02-25  02:02 (UTC)
        LAT:   34:30.00N
        LON: 135:30.00E

LOGIN replaces IDLE.

Flashing during login

SYNC ( NCS )
NCS: IOR        LOGIN

Options

Login

Starting Login Process.
Press any key to escape.

File     Edit     Transmit     EGC        Reports     Logs     

Options

     Setup    Position    StopAlarm

 

Appearance of display screen during login 

When login is completed, the message “Successful Login.” appears. Then, 
the terminal unit goes into “Idle” status and LOGIN stops flashing. 

6.  Press the [Esc] key to return to the standby display. 
 

Summary of Contents for FELCOM 15



















































































































































































































Reviews:

No comments