Furuno FELCOM 15, Operator'S Manual

Page: 186 / 210

APPENDIX
AP-20
Messages
Below are the various operational messages and their meanings. Messages are arranged
according to function key.
[F1] File
1. "Overwrite?"
You are asked if you are sure to overwrite file name entered.
2. "OK to save?"
You are asked if you are sure to save a file.
3. "OK to delete file?"
You are asked if it is OK to delete selected file.
4. "Can't delete."
File cannot be deleted.
5. "Enter new filename"
Enter a new file name (to save file under new name.)
6. "Can't rename."
Cannot
rename file.
7. "Insert new disk for drive "
You are asked to insert a floppy disk in the disk drive.
8. "And select media type"
Select media type of floppy disk.
9. "Format start."
Formatting of the disk begins.
10. "xx% Completed."
Percentage of floppy disk formatted.
11. "Format completed. "
Formatting of floppy disk completed.
12. "Format failed."
Could not format floppy disk.
13. "Press any key to escape."
Press any key to escape and erase message shown.
14. "Abort process."
Formatting aborted.
15. "Drive not ready."
No floppy disk in disk drive.
16. "Write protected."
Floppy disk is write protected.
17. "Drive error."
Floppy disk may be defective.
18. "Checking "
Checking MIME-coded file.
19. "Decode ?"
Decode Base64 coded file.
20. "Now decoding..."
Decoding file.
21. "Complete."
File decoding completed.