Furuno FELCOM 15, Operator'S Manual

Page: 137 / 210

5. DATA REPORTING AND POLLING
5-5
9. Press the [ ↓ ] or [ ↑ ] key to choose “ON” or “OFF” as appropriate.
ON: Message report on
OFF: Message report off
1 0. Press the [Enter] key to close the window.
11 . Press the [
↓
] key to choose Station Name.
1 2. Press the [Enter] key to display the Station List.
1 3. Press the [ ↓ ] or [ ↑ ] key to choose a station.
Note:
You may sort the list by group name, station name or communication
type as follows:
Group name:
Each press of [Ctrl] + [G] sorts the list by group name,
ascending or descending order.
Station name:
Each press of [Ctrl] + [N] sorts the list by station name,
in ascending or descending order.
Comm. type:
Each press of [Ctrl] + [T] sorts the list by
communication type, in ascending or descending order.
1 4. Press the [Enter] key to close the window.
1 5. For e-mail following a)-d) below. For other communication formats, go to step
1 6.
a) Press the [
↓
] key to choose Subject.
b) Press the [Enter] key to show the title window.
c) Type title.
d) Press the [Enter] key to close the window.
1 6. Press the [
↓
] key to choose LES ID.
1 7. Press the [Enter] key to display the LES List.
1 8. Press the [ ↓ ] or [ ↑ ] key to choose an LES.
1 9. Press the [Enter] key to close the window.
20. Press the [
↓
] key to choose Activation.
2 1 . Press the [Enter] key to open the activation options window.
22. Press the [ ↓ ] or [ ↑ ] key to choose “Regular Interval” or “Daily” as appropriate.
23. Press the [Enter] key to close the window.
24. Do one of the following depending on the selection you made at step 22.
“Regular Interval” selected at step 22
( 1 ) Press the [
↓]
to choose Interval Time.
(2) Press the [Enter] key to open the interval time entry window.
(3) Key in the interval time.
(4) Press the [Enter] key to close the window.
(5) Press the [
↓
] key to choose Report Times.
(6) Press the [Enter] key to open the report times entry window.
(7) Key in the report times, or press the [Back Space] key to display “---“ to
choose “No Limit” to transmit data until the “Status” setting is turned OFF.
(8) Press the [Enter] key to close the window.