Furuno FCV-1900, Installation Manual

Page: 38 / 64

3. INITIAL SETTINGS
30
[ Time Offset ]: Enter the time difference between UTC and local time to display the
local date and time. This setting is valid when [Date Time] is set to [Local] on the [Data]
menu.
3.7 Stabilization Setting
The [Stabilization] menu compensates for the effects of heaving, and requires a Sat-
ellite Compass
™
.
Note: This menu is not available when there is no data from the Satellite Compass
™
.
1. Press the MENU/ESC key to open the menu.
2. Rotate the ENTER knob to select [System], then push the knob.
3. Rotate the ENTER knob and select [Stabilization], then push the knob.
[Stabilization] : Turn heaving compensation on or off. Turn it on when seas are
rough, to get stable pictures regardless of sea conditions. When heaving stabili-
zation is turned on, the symbol (
) appears at the upper left corner on the
screen. If the antenna position of the Satellite Compass
™
has not been set, the
message shown below appears. Push the knob to erase the message, then set
the antenna position for the Satellite Compass
™
.
4. Set the antenna position for the Satellite Compass
™
.
• TD fore-aft: Distance (m) from antenna to transducer on the fore-aft line.
• TD port-stbd: Distance (m) from antenna to transducer on the port-stbd line.
Calibration =
value (%)
Fish size
- 1 䚷 ×100
A
10
TVR + RVR
20
Transducer
A
CM265LH
0.197
CM599LH
0.562
PM111LH
0.343
㻲㼛㼞㻌㼇㻱㼤㼠㼑㼞㼚㼍㼘㻌㼒㼕㼟㼔㻌㼒㼕㼚㼐㼑㼞㼉㻌㼠㼍㼎
Stabilization Sensor
Stabilization Area
[HF]
TD fore-aft
TD port-stbd
ANT TD height
[LF]
TD fore-aft
TD port-stbd
ANT TD height
SC-30
15m
0.0m
0.0m
0.0m
0.0m
0.0m
0.0m
㻲㼛㼞㻌㼇㻿㼑㼠㼠㼕㼚㼓㼉㻌㼠㼍㼎
Stabilization
Stabilization Sensor
Stabilization Area
[HF]
TD fore-aft
TD port-stbd
ANT TD height
[LF]
TD fore-aft
TD port-stbd
ANT TD height
On
SC-50
15m
0.0m
0.0m
0.0m
0.0m
0.0m
0.0m
Antenna to Transducer
distances (bow-stern,
port-starboard, height)
are not set, Have a
FURUNO technician
adjust your settings.
Yes