Furuno FCV-1900, Installation Manual

Page: 11 / 64

1. MOUNTING
3
4. Fit the cosmetics caps (removed at step 2) to the control unit.
Method 2: Modified cable entry
1. Follow the steps outlined in steps 1 and 2 of "Method 1: Factory
default" on page 2.
2. Unfasten the two screws from the fixing plate at the rear of the control unit.
3. Adjust the cable to face the rear of the control unit.
4. Orient the fixing plate as shown in the figure below, then fix the plate in place with
the two screws removed at step 2.
Check that the cable is aligned with the fixing plate and facing the rear of the con-
trol unit.
5. Secure the cable to the fixing plate with a cable tie (local supply).
Self-tapping screws
Cosmetic caps
Rear of control unit
Fixing plate
Screws Screws
Fixing plate
Control unit cable
Cable tie Cable tie