manualshive.com logo in svg

Furuno ENVISION AR-100M, Operator'S Manual

Share
Download
Furuno ENVISION AR-100M Operator'S Manual Download Page 38

2.  INSTALLATION AND INITIAL SETTINGS

2-8

*: The USB keyboard is used only for adjusting the initial settings menu. To prevent 

unintended operation, do not connect the USB keyboard during normal use of the 
system.

Note: 

An ENC dongle is necessary to share the ENC charts from the ECDIS. The 

ENC dongle is supplied with the AR navigation system. Keep the ENC dongle con-
nected to one of the USB ports on the main PC while using the AR navigation system.

Hiding the LED indicators

If the LED indicators on the main PC and the ENC dongle are too bright at night, cover 
them with vinyl tape. The location of the LED indicator is shown in the following figure.

Remote PWR switch

Connect a remote switch (supplied locally) to the Remote PWR switch port, to turn the 
system on/off from a remote switch.

Front

Rear

ENC dongle

1

2

Status

Short 1 and 2.

Open

Description

Turn the system on/off.

-

Summary of Contents for ENVISION AR-100M










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands