2. INSTALLATION AND INITIAL SETTINGS
2-7
2.2
Wiring
2.2.1
Main PC
Interface
No.
Name
Description
1
USB2.0 Port
2
u
USB2.0, used for connecting the trackball, ENC
dongle, USB flash memory and USB keyboard*.
Note:
Do not connect a USB device other than the
above-mentioned devices.
2
Power Button
Turns the system on/off.
3
Reset Button
Resets the system.
4
Remote PWR Switch Port Connect a remote switch (locally supplied), using
the supplied remote switch cable, to turn the system
on/off from the remote switch.
5
LED Indicator
Upper is for power, lower is for SSD.
6
12 VDC Power Input Port
Connect the supplied AC adapter.
7
HDMI 2 Port
Not used.
8
HDMI 1 Port
Connect a monitor unit (locally supplied), using the
supplied HDMI cable. It is recommended to use a
monitor whose resolution is full HD (1920
u
1080).
9
Serial Port
RS-232C port, Not used.
10
USB2.0 Port
2
u
USB2.0, used for connecting the trackball, ENC
dongle, USB flash memory and USB keyboard*.
Note:
Do not connect a USB device other than the
above-mentioned devices.
11
USB3.0 Port
2
u
USB3.0, used for connecting the trackball, ENC
dongle, USB flash memory and USB keyboard*.
Note:
Do not connect a USB device other than the
above-mentioned devices.
12
LAN2 Port
Connect the IP camera through the PoE adapter.
13
LAN1 Port
Connect the HUB-3000 to communicate with the
bridge navigational equipment.
Front
Rear
1
2
6
7
8
9
10 11
12
13
3
4 5
