4. BASIC SETUP
4-11
4.6 Position
Setup
This is where you enter your position, automatically or manually.
1. Press the
MENU
key at the standby display.
2. Rotate the
CH
knob (or press up / down arrow key) to choose POSITION from
the second page of the main menu.
**** SETUP MENU ****
POSITION
VOLUME
PRINT OUT
SYSTEM
T
3. Press the
ENT
key. The following menu appears.
INPUT TYPE: AUTO
LAT : --
°
--’-
LON : ---
°
--’-
TIME : -- : --
N
E
4. INPUT TYPE is selected; press the
ENT
key. The following setting window
appears.
AUTO
MANUAL
5. Rotate the
CH
knob (or press up / down arrow key) to choose AUTO or
MANUAL as appropriate and press the
ENT
key.
If you chose AUTO, your ship's position and time appear; press the
CANCEL
to close the menu and return to the standby display. These data are supplied
from the navigation equipment connected.
Note
:
•
If the position data from a positioning sensor is available, MANUAL
can not be chosen.
•
If correct position data is entered from a position source in the
setting of MANUAL, the setting changes automatically to AUTO from
MANUAL.
•
If the message "No Position Data" appears after you change INPUT
TYPE from MANUAL to AUTO, confirm that the navigation device is
functioning.
If you chose MANUAL, enter your position and time as follows.
6. Enter latitude (in four digits) with the numeric keys. If necessary, switch
coordinates:
1
key to switch to North;
2
key to switch to South.
7. Press the
ENT
key and enter longitude (in five digits) with the numeric keys. If
necessary, switch coordinates:
1
key to switch to East;
2
key to switch to
West.
8. Press the
ENT
key and enter UTC time with the numeric keys.
9. Press the
ENT
key and
CANCEL
key to finish.
Summary of Contents for 9ZWFM8800D
