Furuno 9ZWFM8800D, Operator'S Manual

Page: 45 / 116

3. DSC OPERATION FOR NON-DISTRESS CASES
3-3
10. TCmd2 is selected; press the
ENT
key.
S
V. 26 ter
V. 27 ter
V. 32
V. 21
V. 22
V. 22 bis
V. 23
V. 26 bis T
11. Choose the data type and press the
ENT
key.
12. Choose CH and press the
ENT
key. The following window appears.
SELECT CH
NO INFO
13. Choose SELECT CH or NO INFO as appropriate followed by pressing the
ENT
key. If you chose SELECT CH, the following channel list appears. (The
example shown is the international, duplex channel list.) Rotate the
CH
knob
(or press up / down arrow key) to choose a channel you wish to communicate
over and then press the
ENT
key.
DUP CHANNEL
01
02
03
04
05
07
18
19 86
28
60
61
62
63
64
65
66 78
79
80
81
82
83
84
85
20
21
22
23
24
25
26
27
14. Press the
CALL
key more than three seconds to transmit the message.
3.1.2 Receiving acknowledgement of coast or ship call
1. After a coast or ship call is sent, the equipment waits for acknowledgement of
the call, showing the display below.
Waiting for
acknowledgement.
COAST ID : 003456789
ROUTINE
TCmd1 : SIMPLEX TP
TCmd2 : NO INFO
CH : 12
TIME TO GO : 3M30 S
The timer starts counting down the maximum time to wait for acknowledgement,
five minutes.