Furuno 9ZWFM8800D, Operator'S Manual

Page: 49 / 116

3. DSC OPERATION FOR NON-DISTRESS CASES
3-7
2) Sending automatic acknowledge (ACK BQ) with comply status
"UNABLE."
1. When the automatic acknowledge feature is active (AUTO ACK), the comply
status is "UNABLE" and a coast or ship call is received, the display shown
below appears, indicating that the auto acknowledge call with UNABLE (ACK
BQ) has been sent. The alarm sounds and the ALARM LED blinks two
minutes.
Unable acknowledge
transmitted.
ROUTINE
TCmd1 : UNABLE
TCmd2 : BUSY
CANCEL ALARM
CH : NO INFO
2. Press the
CANCEL
key to silence the alarm. The following display appears.
** Send Message **
COAST BQ
TO : 123456789
ROUTINE
TCmd1 : UNABLE
TCmd2 : BUSY
CH : NO INFO
PRESS ENT
3. Press the
ENT
key.
4. Then, prepare a message and sent it following the procedures shown on in
paragraph 3.1.1.