Furuno 9ZWFM8800D, Operator'S Manual

Page: 69 / 116

3. DSC OPERATION FOR NON-DISTRESS CASES
3-27
9-2. When "No response! Try calling again?" is displayed, do one of the
following:
Re-send call: Push the
ENT
key followed by the
CALL
key.
Cancel call: Press the
CANCEL
key to return to the standby display.
3.7.2 Receiving a polling call
Automatic reply
1. When a polling request is received and the equipment is set up for automatic
acknowledge POLLING on the AUTO ACK menu is ON and the
ACK
key is
set to show AUTO ACK on the display, t he display changes as shown in the
illustration below and the audio alarm sounds
.
Polling auto ack
transmitted.
ROUTINE
TCmd1 : POLLING
TCmd2 : NO INFO
CANCEL ALARM
2. Press the
CANCEL
or
ENT
key to silence the alarm. The display changes as
below.
** Send Message **
POLLING ACK
TO : 123456789
ROUTINE
TCmd1 : POLLING
TCmd2 : NO INFO
PRESS ENT