Furuno 9ZWFM8800D, Operator'S Manual

Page: 30 / 116

2. DSC DISTRESS COMMUNICATION
2-6
2.4 Canceling a False Distress Alert
If you have transmitted a distress alert by mistake, do the following to cancel it
.
1. Switch off equipment immediately.
2. Switch equipment on and set to Channel 16.
3. Transmit message to “All Stations” giving your vessel's name,
call sign and DSC number.
Example message
All Stations, All Stations, All Stations
This is VESSEL'S NAME, CALLSIGN,
DSC NUMBER, POSITION.
Cancel my distress alert of DATE, TIME, UTC.
=Master, VESSEL'S NAME, CALLSIGN.
DSC NUMBER, DATE, TIME UTC.
2.5 Receiving Distress Alert from Other Vessel,
Transmitting DIST ACK Signal
In no case is a ship permitted to transmit a DSC distress relay call upon receipt
of a DSC distress alert on VHF channel 70.
Procedure when in area A1
1. When the FM-8800D/8800S receives a distress alert from another vessel, the
ALARM LED (red) blinks and the FM-8800D/8800S sounds the distress
alarm.
2. Silence the alarm by pressing the CANCEL key.
3. Wait up to five minutes until the DIST ACK signal from a coast station is
received. Be prepared to follow the instructions of the coast station.
4. If you do not receive the DIST ACK signal, follow the flow chart shown on
page 2-8 to determine if your vessel should acknowledge a distress alert.
If further DSC alerts are received from the same source and the ship in distress
is beyond doubt in the vicinity, a DSC acknowledgement may, after consultation
with an Rescue Co-ordination Center (RCC) or Coast Station, be sent to
terminate the distress call.
Note 1: An asterisk (*) in a received distress alert message indicates error or
unknown at the location marked with the asterisk.
Note 2: Do not send DIST ACK in response to receipt of distress alert having the
nature of distress as “EPIRB emission”.