Furukawa Unic URW376C4U -T Series, Operation & Maintenance Manual

Page: 12 / 156

2-4
SAFETY PRECAUTIONS ON CARRIER OPERATION
1
Return the crawling lever and run the
engine at a low speed.
After operation
2
Shift the crawling lever to “Crane” posi-
tion.
3
Stop the engine and remove dirt and
dust stuck on the crane body.
★
Since dust stuck on the battery, electric
wiring, and engine related components such
as muffler may cause a fire in particular, be
sure to remove it.
4
Cover the crane or store it in a storage
house to prevent it from being accessed
by unrelated persons such as children.
★
Cover the crane after heated sections
have been cooled off.
Putting a cover on while the crane body is
still hot may cause a fire.
5
Remove the starter switch key to store.
★
Failure to disconnect it may cause a fire
as cables short-circuited by gnawing animals
such as rat.
6
Disconnect a battery cable before the
crane is to be stored for a long period of
time.
Cable (-)
Disconnect
When loading and
unloading
1
When loading and unloading the crane,
use a non-slip foot-board with a enough
capacity of strength, width, and length
and run the crane straight up and down at
a very low speed.
Changing direction of the crane on the foot-
board may cause the crane to fall off.
2
Stop the engine, apply parking brake,
and put drags to wheels to secure the
mounting vehicle when loading and unload-
ing the crane.
★
Failure to observe this may cause the
crane to fall off because the vehicle shift
while it is being loaded and unloaded.
★
Work by following the instructions illus-
trated in the sticker, “Loading and unloading
procedures”. (Refer to page 6-5.)