Furukawa electric S124, User Manual

Page: 43 / 109

42
4. While in Pause status, pressing displays options available in the
process. To resume the process, press .

Screen Capture: Capture the fiber image and store it.

Fiber Measurement: Performs an auto or manual inspection of the
fiber with regards to clad and core offset, relative eccentricity, gap,
fiber tilt and relative cleave angle.
5. After displaying the estimation loss, the following operations are
available.

Press ▲ to discharge an additional arc. Splice inspection and loss
estimation are re-performed.

Press to switch the fiber view between X and Y.
6. Tension test is performed by pressing / key or opening the
windshield.

If the fibers fail the cleave criteria inspection, the fusion cycle is
paused and an appropriate error message is displayed as below.
Press ▼ to temporarily hide message and check the state of the
fiber. Press “Retry” or key, open the windshield, remove the